DESCRIPTION

The Crystal Oscillators provide generation of high stability signals.

Crystal Oscillators are widely used in communication, navigation, radiolocation systems, in frequency measurement equipment as reference signal sources and in atomic frequency standards as output signal sources.

Environmental resistance, small size, weight, power consumption and a short warm-up time allow to use Oscillators in various mobile systems and complexes.

SPECIFICATIONS

Parameter

Option 1

Option 2

A

B

C

A

B

C

Output frequency, MHz

5

10

Tuning range (with an external corrector)

>±5.10–7

>±5.10–7

Output level, V (Rl=50 Ohms)

0.5±0.15

0.5±0.15

Frequency ageing after 72 h continuous operation:

per day

±5.10–10

±1.10–9

±2.10–9

±5.10–10

±1.10–9

±2.10–9

per year

±5.10–8

±1.10–7

±2.10–7

±5.10–8

±2.10–7

±2.10–7

Short-term stability (Allan var.):

1 s

3.10–12

5.10–12

1.10–11

5.10–12

5.10–12

1.10–11

10 s

5.10–12

5.10–12

1.10–11

5.10–12

5.10–12

1.10–11

Phase noise spectral power density, dBc/Hz:

at 10 Hz offset from carrier

–125

–125

–120

–125

–125

–120

at 100 Hz offset from carrier

–145

–145

–140

–145

–145

–140

at 1 kHz offset from carrier

–155

–155

–150

–155

–155

–150

at 10 kHz offset from carrier

–157

–155

–150

–157

–155

–150

Frequency tuning with ±5 V external voltage

±(2.5–10).10–8

±(2.5–10).10–8

Operating temperature range, °C

–40–+65

–40–+70

Frequency stability over operating temperature range

±3.10–8

±3.10–8

Frequency setting time after switch on within ±3.10–8 from the settled value, not more than, min.

6

6

Supply voltage (stabilized), V

+12(15, 18, 20)±10 %

+12(15, 18, 20)±10 %

Power consumption at +25 °C, W:

steady state

1.5

1.5

during warm-up

8

8

Dimensions, mm

45x45x38

45x45x38

Weight; volume, kg; cm3

0.09, 80

0.09, 80