Electricity Meters  Single-phase meters Unitariff meters  SEO-1.15 meter Nominal voltage - 230 V
Nominal (maximum) current - 5 (60) or 10 (100) À
Accuracy class - 1,0 or 2,0
Number of tariffs - 1
Telemetric output
|
|
Electricity Meters Single-phase meters Unitariff meters  SEO-1.15D meter Nominal voltage - 230 V
Nominal (maximum) current - 5 (60) or 10 (100) À
Accuracy class - 1,0 or 2,0
Number of tariffs – 1
Communication interfaces - optoport
Telemetric output
The meter is to be fixed on DIN-bar
|
|
Electricity Meters Single-phase meters Unitariff meters 
SEO-1.20 meter
Nominal voltage - 230 V
Nominal (maximum) current - 5 (80) À
Accuracy class - 1,0
Number of tariffs - 1
Telemetric output
|
|
Electricity Meters Single-phase meters Multitariff meters  SEB-2A.07 Nominal voltage - 230 V
Nominal (maximum) current - 5 (50) or 10 (100) À
Accuracy class - 1,0 or 2,0
Number of tariffs – 2 or 4
Communication interfaces - RS-485 or optoport
|
|
Electricity Meters Single-phase meters Multitariff meters  SEB-2A.07D Nominal voltage - 230 V
Nominal (maximum) current - 5 (50) or 10 (100) À
Accuracy class - 1,0 or 2,0
Number of tariffs – 2 or 4
Communication interfaces - RS-485 or optoport
The meter is to be fixed on DIN-bar
|
|
Electricity Meters Single-phase meters Multitariff meters  SEB-2À.08 Nominal voltage - 230 V
Nominal (maximum) current - 10 (80) À
Accuracy class - 1,0 or 2,0
Number of tariffs – 4
Communication interface - RS-485
Load control function |
|
Electricity Meters Single-phase meters Multifunction meters  SEB-1TM.02D Nominal voltage - 230 V
Nominal (maximum) current - 5 (75) À
Accuracy class - 1,0
Number of tariffs - 4
Communication interface – optoport or RS-485, supports ModBus- similar, SET-4ÒÌ.02 compatible exchange protocol.
Load control function.
SEB-1ÒÌ.02D modification is to be fixed on DIN-bar.
|
|
Electricity Meters Single-phase meters Multifunction meters 
SEB-1TM.02M
Rated voltage – 220, 230 V
Rated (maximum) current – 5 (80) A
Accuracy class when measuring active (reactive) energy – 1 (2)
Number of tariffs – 4
Communication interfaces – optical port, PLC, radio interface
ModBus-similar, SET-4TM.02-compatible exchange protocol
Load control function
Options of electric meter design with splitted architecture comprise two units:
Meter unit for outdoor installation having degree of protection against ingress of dust and water IP55;
Remote terminal in a case for DIN-rail mounting
|
|
Electricity Meters Locomotive meters  SET-1Ì.01Ì Rated voltage – 230 V
Rated(maximum) current - 5 (10) À
Accuracy class at measurement of active (reactive) energy and power - 0,5S (1,0)
Number of tariffs - 1
Communication interfaces – RS-485, optoport, CAN
|
|
|
